Description
The traditional sanding head is built on a very flexible modular system and can be supplied in any length required. Therefore, it can be used on almost any type of existing machine. The sanding heads are designed with a distance between the grooves, ensuring that the abrasive brushes will not stack-up on each other. Disk Head The unique and patented design of Flex Trim discs ensures that they can be used for all kinds of sanding. The design, of course, is also based on replaceable-brush technology.
The inclination of the disc ensures that dust and burrs are thrown out instead of gathering in the middle.
The inclination also ensures uniform sanding quality and easy handling during manual operation. The higher pressure in the middle compensates for the higher outer speed, which ensures uniform sanding quality. One of many advantages of the original Flex Trim disc head is that the sanding brushes are replaced without dismantling the shaft and the head. Simple removal of the O-ring is enough.
The discs are produced using polyoxymethylene (POM), which is chemical-resistant, allowing the discs to be installed in all environments. A disc head results in an even and aggressive sanding, and the rotation forces the brushes to attack all profiles, holes and edges evenly.
The discs are available in two standard diameters:
Ø125 mm 12 grooves 40 mm
Ø180 mm 18 grooves 60 mm
Technical Data
| Traditional Sanding Heads | ||
| Diameters | Nr. Grooves | Recommended RPM |
| Ø80 mm | 20 | 700-900 |
| Ø100 mm | 20 | 600-900 |
| Ø120 mm | 24 | 400-700 |
| Ø180 mm | 36 | 250-400 |
| Ø280 mm | 54 | 50-300 |
| Aluminium | ||
| Ø120 mm | 16 | 400-700 |
| Ø180 mm | 24 | 250-400 |
| Ø240 mm | 30 | 100-350 |
